+380 66 766 62 62
UA
Book a consultation

Licence plate recognition in Milestone XProtect: whitelist entry

The barrier opens for your vehicles, security sees strangers, and every entry is logged with video.

Licence plate recognition in Milestone XProtect: whitelist entry

When dozens of staff, supplier and visitor vehicles enter a site every day, a guard with a logbook becomes a bottleneck. Licence plate recognition in Milestone XProtect automates entry: the system reads the plate, checks it against lists and controls the barrier itself.

What the system consists of

  • An entry camera tuned for reading plates: narrow angle, IR illumination and short shutter.
  • The XProtect LPR module on the video server, which recognises the plate and checks it against the lists.
  • A control output to the barrier or gate, for example a CAME drive.
  • An overview camera showing the vehicle and driver for the log.

How we set up the entry

First we measure the lane and pick the point where vehicles slow down before the barrier. The camera is placed so the plate gets enough pixels and oncoming headlights do not wash out the image. Dedicated cameras from Hikvision and other makers supported by Milestone suit this job.

Then we create a recognition zone in XProtect, set the Ukrainian plate format and load the lists: staff, scheduled suppliers, stop list. Each list gets an action: open the barrier, alert security or just log the entry.

Testing and result

We test recognition by day, at night, in rain and with dirty plates and tune it until results are stable. After launch every entry goes into the log with a plate photo and video, and finding a vehicle by plate takes seconds.

The system can grow: parking space counting, visitor passes through access control, and stop-list alerts on the CCTV operator desk.

Equipment in this article

  • Milestone SystemsMilestone Systems
  • CAMECAME
  • HikvisionHikvision

How we work

  1. Site visit and audit

    An engineer inspects the site and clarifies the task and constraints. Free within the city.

  2. Design and estimate

    A technical solution, layout plan, equipment specification and a transparent estimate.

  3. Installation and setup

    Cable routing, installation, commissioning and training for your staff.

  4. Service and support

    System warranty, scheduled maintenance and a fast call-out when needed.

Book a consultation

Call us or message us on Viber: an engineer will answer your questions and arrange a free site visit.

Call Consultation