+380 66 766 62 62
UA
Book a consultation

Electrical and backup power

Wiring, distribution boards and backup power, so lights, cameras, alarms and the boiler keep working during outages.

Security systems are only as reliable as their power. That is why we do the electrics ourselves, from the panel design to commissioning the inverter.

We start with the load calculation: what exactly must run without mains (cameras, alarm, router, boiler, pump, fridge) and for how many hours. We size the UPS, inverter and batteries to these figures, not the other way round, and add automatic transfer to a generator if you have one.

We build distribution panels with every circuit labelled and install wiring, lighting, earthing and lightning protection. Dedicated circuits and breakers for low-voltage systems protect cameras and server room equipment from voltage spikes.

Electrical work is the foundation for the other systems: networks and server rooms, smart home, CCTV and alarms. When one team does it all, there is no argument about who is responsible for a fault.

What you get

  • Power during outages

    We size the UPS, inverter and batteries to your appliances and outage length.

  • Safe wiring

    Cable sizing, breakers, RCDs and earthing to code.

  • Tidy boards

    Assembled and labelled boards that are easy to work with years later.

  • One contractor for everything

    Power and low-voltage systems are designed together, with no cable clashes.

What's included

  • Wiring and lighting
  • Distribution boards
  • UPS and inverters
  • Battery storage
  • Generator connection and ATS
  • Earthing and lightning protection

FAQ

How many hours will backup power last?

It depends on battery capacity and load. We calculate it for specific appliances, such as the boiler, router, cameras and lighting.

Can a generator start automatically?

Yes, with an automatic transfer switch the generator starts on its own when mains power fails.

Do you do full flat wiring?

Yes, from design and wall chasing to sockets, light fittings and the finished board.

How we work

  1. Site visit and audit

    An engineer inspects the site and clarifies the task and constraints. Free within the city.

  2. Design and estimate

    A technical solution, layout plan, equipment specification and a transparent estimate.

  3. Installation and setup

    Cable routing, installation, commissioning and training for your staff.

  4. Service and support

    System warranty, scheduled maintenance and a fast call-out when needed.

Book a consultation

Call us or message us on Viber: an engineer will answer your questions and arrange a free site visit.

Call Consultation